T Type Table Feeder
For feeding raw materials of various shapes
T achieves continuous feeding without changing shape of raw material.
Features
- Table Feeder “T Type” can feeding flakes, pellets, granules, lumps, fibrous raw materials.
- Since T uses a table type feeding disk, feeding continuously without pulsation.
- T forcibly discharges materials with a deflection plow(scraper) inserted inside the vessel, so materials does not remain.
Details
【Structure】
The powder from the upstream equipment(e.g. silo) is stacked in a conical shape on the flat Feeding Table⑦ according to the angle of repose. This table bring material from Upper Vessel⑨ through Lower Vessel⑧ to the Horizontal Scraper⑥.
Combination adjust the vertical position of Discharge Gate⑩ with adjust rotation speed by inverter of Feeding Table⑦ gives broad range of feed rate.
| No. | Name |
|---|---|
| 1 | Motor |
| 2 | Reduction Gear |
| 3 | Vertical Shaft |
| 4 | Exit Chute |
| 5 | Bottom Pan |
| 6 | Scrape plate |
| 7 | Feeding Table |
| 8 | Lower Vessel |
| 9 | Upper Vessel |
| 10 | Exit Gate |
Specification
| Feed rate | Motor Power | Weight | |
|---|---|---|---|
| T-03 | 500L/h | 0.75kW | 400kg |
| T-05 | 2m3/h | 1.5kW | 700kg |
| T-07 | 5m3/h | 1.5kW | 1100kg |
| T-10 | 10m3/h | 2.2kW | 1700kg |
| T-15 | 30m3/h | 5.5kW | 3200kg |
| T-20 | 50m3/h | 11kW | 5000kg |
| T-24 | 60m3/h | 15kW | 7000kg |