PRODUCT

Features

• Sanitary Feeder “R1/S1/G2 Type” can be disassembled / assembled with one touch without using a tool. Therefore it enhance sanitation while speeding changeovers, reducing downtime and boosting productivity.
• R1 can be customize according to the application and material properties. Thus highly accurate feeding can be achieved even with sanitary specifications.
• R1/S1/G2 can be used for applications requiring hygiene control(e.g. food processing).

	Feeding Table Type	Leveling System	Application
R1 Type	Ring table	gravitational	Wet powder
S1 Type	Step table	Scraper	Dry powder
G2 Type	Groove table	Scraper	Adhesive powder

R1 Type Details

【Features】

Sanitary Feeder “R1 type” achieves quantitativeness by filling the measuring chamber consists of impeller, vessel and levelling plate, so it has the best feeding stability.

Since R1 has a structure for forcibly plowing the powder with a scraper, stable feeding is possible even with adhesive powder(e.g. wet cake powder).

【Structure】
The powder from the upstream equipment (e.g. Silo) is charged to the feeding table in a uniform condition without consolidation by the Agitator⑨.

The raw material charged to the Feeding Table④ is levelled to a certain amount by the Levelling Plate⑧ and discharge from the Chute⑦ section.

R1 achieves a variable feed rate by the inverter adjustment.

S1 Type Details

【Features】

• Sanitary Feeder “S1 type” is a quantitative feeder that enables continuous feeding without changing the shape of granular, flake, pellet, or bulk material.
• With combination of step type feeding table and scraper, it is possible to feed continuously to the downstream process without generation of material bite and abrasion.

【Structure】
The powder from the upstream equipment (e.g. Silo) is charged to the feeding table in a uniform condition without consolidation by the Agitator⑤.

The raw material charged to the Feeding Table④ is levelled to a certain amount and then cut along the Horizontal Scraper⑨ to the Chute⑧ section.

By combination of the inverter and the Horizontal Scraper⑨ adjustment handle(optional), S1 achieves a broad feed rate setting.

G2 Type Details

【Features】

• Sanitary Feeder “G2 type” is a quantitative feeder that has a structure for forcibly plowing the powder with a scraper, stable feeding is possible even with adhesive powder.
  
• Bridgeless design!
  CF consists of a supply unit and a agitation unit.
  Since it is possible to design that a feeding table with a small diameter is arranged outside the diameter of the silo opening, stable feeding is possible even if feeding amount is small.

【Structure】

The powder from the upstream equipment(e.g. silo) is relieved vertical pressure by the Spout⑥. Therefore, the powder is filled in the Feeding Table⑩ by Agitator⑤ with less consolidation.

The raw material charged to the Feeding Table⑩ is levelled to a certain amount and then cut along the Vertical(Diagonal) Scraper⑨ to the Chute⑧ section.

By combination of the inverter and the Vertical Scraper⑨ adjustment handle(optional), S1 achieves a broad feed rate setting.

Product introduction（Video）Sanitary Feeder

Specification

	Feed rate	Motor Power	Weight
R1-04	500L/h	0.4kW	190kg
R1-05	1000L/h	0.75kW	270kg
S1-03	500L/h	0.4kW	160kg
S1-04	1100L/h	0.75kW	190kg
S1-05	2300L/h	0.75kW	270kg
G2-03	50L/h	0.2kW	200kg
G2-04	150L/h	0.4kW	220kg
G2-05	400L/h	0.75kW	290kg

Applicable Powder Material List for Feeders

R1 Type Ring Table
Tea powder	Activated carbon
Pigment	Dehydrated cake
Organic feed	Dried sludge
Fertilizer

S1 Type Step Table
Salt	Pellet
Sand	Flake type material
Glass beads	Granular material
Flax

G2 Type Groove Table
Flour	Wax
Seasoning	Silica
Bisphenol	Clay
Talc	Jeweler’s rouge