T / RS Type Biomass Feeder
For Biomass and Recycling Materials
Overview
The biomass feeder is a volumetric feeder capable of stable and volumetric feed to the next processing stage of biomass materials that are difficult to feed.
GMEC（Global Materials Engineering Co., Ltd.） has performed many storage and feed tests of various biomass materials (wood chips, RPF, cut tires, bagass, waste plastic).
With this information, we have resolved many issues affecting biomass material feed equipment’s that cause unstable feed to downstream equipment’s such as bridging in the storage hopper and sticking inside of the feeder.
By doing this, the machines have evolved into a more practical and reliable volumetric feeders.
Furthermore, we have various models with designs, capable of handling biomass materials with wide range of forms and characteristics.
We can offer a wide selection of feeders that meet with customer’s required specification.
Ｔ TYPE
1.The actualization of continuous feeding without pulsation
As powders deposited into the feeding table are continuously scooped by the scraper, continuous feeding without pulsation is made possible.
2. Perform continuous feed without Material Sticking
Simple Construction allows to feed material continuously without material sticking.
3. Little Leftover Material allows Easy Cleaning
As this feeder uses a scraper to shovel through the interior of the feeder, there is little leftover material which allow easy cleaning.
4. Perform stable feed without altering the Shape of the Material
As this feeder is designed not to agitate the material, it is capable of stable feed without altering the shape of the material.
| 1 | Motor |
| 2 | Reduction Gear |
| 3 | Bottom Pan |
| 4 | Vessel |
| 5 | Inlet Pipe |
| 6 | Chute |
| 7 | Feeding Table |
| 8 | Scraper |
RS TYPE
1. Allows the feed of amorphous materials prone to sticking and compaction
The torque detection feature automatically directs the feeder to rotate normally or in reveres, protecting against sticking and compaction, and allowing stable operation.
2. No Bridging Inside of the Storage Hopper
By increasing the diameter of the feeder entrance it is possible to achieve stable feed without bridging.
3. Perform stable feed of Materials with Light Bulk Density.
As this feeder is designed to force material feeding through the exhaust, it is even capable of stably feed materials with light bulk density.
| 1 | Motor |
| 2 | Reduction Gear |
| 3 | Bottom Pan |
| 4 | Vessel |
| 5 | Chute |
| 6 | Feeding Table |
| 7 | Agitator |
Specification
| Ｔ TYPE | Feed rate | Motor Power | Weight |
|---|---|---|---|
| T-10 | 30m3/h | 2.2kW | 1700kg |
| T-12 | 40m3/h | 2.2kW | 2400kg |
| T-15 | 50m3/h | 5.5kW | 3200kg |
| T-20 | 60m3/h | 7.5kW | 5000kg |
| T-24 | 80m3/h | 11.0kW | 7000kg |
| RS TYPE | Feed rate | Motor Power | Weight |
|---|---|---|---|
| RS-10 | 10m3/h | 2.2kW | 1300kg |
| RS-12 | 15m3/h | 3.7kW | 1500kg |
| RS-14 | 20m3/h | 3.7kW | 1800kg |
| RS-16 | 25m3/h | 5.5kW | 2200kg |
| RS-18 | 35m3/h | 5.5kW | 2800kg |
| RS-20 | 45m3/h | 7.5kW | 3500kg |
| RS-24 | 60m3/h | 7.5kW | 4500kg |
Usage Examples
Storage and Feeding System
Suitable for feeding material in recycling equipments.
Measuring-type Pneumatic-Transport System
Suitable for feeding fuel (waste plastic and paper) in incineration equipments.
Raw material specimen
 |  |  |
| Crush tire | Bagasse |
Refuse Paper & Plastic Fuel |
| View video | View video | View video |
 |  |  |
| Wood chip | Waste plastic | Fine wood chip |
 |  |  |
| Waste rubber | Waste plastic | Waste laminate |